Quick Take
Quick Take: PowerStore T is a dual-node NVMe appliance that scales up and scales out as a cluster. Alletra Storage MP B10000 disaggregates controller performance from JBOF capacity under GreenLake ops. Peer them on usable TB, protocols, and latency — not model nicknames. Equalize reduction and support years. BENQUAN GLOBAL LIMITED supplies both.
When PowerStore vs Alletra Actually Matters
Quick Answer: Use this bake-off for midrange and enterprise AFA refreshes, Unity or MSA step-ups, and Dell versus HPE estate decisions. Also shortlist Pure, NetApp, or FlashSystem columns when the RFP is open. Server fleets usually tip the scale first: PowerEdge estates gravitate to PowerStore, while ProLiant shops consuming GreenLake gravitate to Alletra MP.
- Dell gravity: PowerEdge + PowerStore + VMware densify paths. Related: R760 vs DL380 · PowerStore VM capacity.
- HPE gravity: ProLiant + Alletra + GreenLake ops; Aruba campus adjacency sometimes follows.
- MSA outgrown: Decision tree for stay/expand vs Alletra vs PowerStore — MSA replacement guide.
- Wider AFA shortlist: PowerStore vs Pure vs NetApp · FlashSystem vs PowerStore.
Deep specs: PowerStore T · Alletra MP B10000 · PowerStore T ladder.
Architecture Fork — Appliance vs Disaggregated
Quick Answer: Each PowerStore T appliance is a dual-node NVMe pair: performance and capacity rise together through appliance tiers, ENS shelves, and clustering up to four units. Alletra MP B10000 separates the two, letting controller nodes and NVMe JBOF capacity grow on their own cadences. Buy the pattern that matches how growth actually gets funded.
| Dimension | Dell PowerStore T | HPE Alletra Storage MP B10000 |
|---|---|---|
| Pattern | Dual-node NVMe appliance (+ ENS scale-up) | Disaggregated controllers + NVMe JBOF |
| Scale-out | Cluster up to four appliances (mobility rules apply) | Multi-node scale-out; topology B10100 vs B10200 |
| Perf vs capacity | Tied more tightly to appliance tier + shelves | Scale cores/nodes vs shelves more independently |
| Protocols | FC, NVMe/FC, iSCSI, NVMe/TCP; NFS/SMB; vVols | 32Gb FC and 10/25GbE (iSCSI / NVMe/TCP / file) — confirm on quote |
| Ops plane | PowerStoreOS + Dell tooling / CloudIQ adjacency | GreenLake-centric Alletra ops |
Naming traps
Alletra Storage MP X10000 is unstructured (file/object) — different BOM. This bake-off is B10000 block/file only. PowerStore Q SKUs use QLC economics — call them out if density is the goal.
Peer Mapping (Intent, Not Nicknames)
Quick Answer: Map by usable capacity and latency class rather than model nicknames. Entry briefs pair the 500T or 1200T against a compact B10100 start, mainstream midrange puts the 3200T against a B10100 or B10200 sized on terabytes and cores, and performance or shelf-growth estates weigh the 5200T and 9200T against higher-core switched B10200 topologies.
| Intent | PowerStore T path | Alletra MP path |
|---|---|---|
| Entry / compact | 500T / 1200T class | B10100 compact node+shelf start |
| Mainstream midrange | 3200T class (+ shelves) | B10100/B10200 sized to TB + cores |
| Higher performance | 5200T / 9200T class | Higher-core nodes (16/32) + shelf plan |
| Large shelf growth | ENS scale-up + cluster plan | Prefer B10200 switched topology |
Ops & Ecosystem Fit
Quick Answer: Operating skill decides more than feature checklists here. A PowerEdge and vVols estate with Unity arrays to retire points at Dell; buyers who already consume HPE through GreenLake and want capacity to grow without a controller refresh point at Alletra MP. Switch brand preference should not cast the deciding vote.
- Lean PowerStore when: Dell servers, VMware vVols emphasis, existing PowerStore skill, Unity migration paths.
- Lean Alletra MP when: HPE servers, GreenLake operating model, desire to scale IOPS and TB on different cadences.
- Wireless/network gravity: Not decisive alone — but HPE Aruba or Dell networking standards sometimes travel with storage preference.
MSA readers
If your trigger is “MSA pushed beyond configuration,” start with the MSA replacement guide, then return here for the PowerStore vs Alletra MP commercial bake-off.
Sizing Truth — Equal Assumptions
Quick Answer: Both quotes must rest on one set of assumptions: identical usable terabytes, one agreed reduction ratio, the same host connectivity choice, and matching support terms. Datasheet effective capacity is a scenario, not a guarantee. Price the migration project separately, because retiring Unity differs sharply from retiring an MSA.
- Usable vs effective: Brochure PBe is not a purchase certificate.
- Host path: FC vs iSCSI vs NVMe/TCP changes server HBA/NIC spend.
- Replication / cyber: State RPO and immutable snapshot needs on both BOMs.
- Migration labor: Unity→PowerStore and MSA→Alletra are different projects — budget cutover.
RFQ Checklist — Dual AFA BOM on One Brief
Quick Answer: Write the capacity and performance brief once, then make Dell price a PowerStore T configuration and HPE price a B10000 configuration against it. Both columns need the same reduction assumption, the same protocol list, the same support duration, and a named migration source array with its cutover window.
What to put on the RFQ
- Usable TB year-1 and year-5; VM/DB/VDI mix
- Latency / IOPS targets; RPO/RTO if replicating
- Protocols: FC / iSCSI / NVMe/TCP / file / vVols
- PowerStore: T model, Q vs TLC preference, ENS shelves, cluster size
- Alletra: B10100 vs B10200, controller core tier, shelf count, GreenLake entitlement
- Data-reduction assumption both must use
- Support: 3 or 5 years, itemized equally
- Migration source array and cutover window
Use SKU Lookup, then submit the dual-vendor brief on rfq.html.
Frequently Asked Questions
Quick Answer: Neither array is universally stronger: Dell suits appliance clusters beside VMware, while HPE suits GreenLake operations and independent capacity growth. Comparing a 500T against an MP chassis is only fair on one capacity and protocol brief, and adding Pure or FlashSystem columns stays reasonable during an open tender.
Not universally. PowerStore wins for many Dell/VMware appliance estates. Alletra MP wins when GreenLake ops and disaggregated scale matter. Dual-RFQ matched briefs.
Only on the same usable capacity and protocol brief. Architecture differs — do not compare stickers alone.
Often yes. Add columns via PowerStore vs Pure vs NetApp and FlashSystem vs PowerStore.
Submit one RFQ with the dual-vendor checklist above.
Key Takeaway
Key Takeaway: Choose PowerStore T when appliance clusters of up to four units fit a Dell and vVols estate; choose Alletra MP B10000 when GreenLake ops need cores and terabytes scaling independently. Fix one reduction ratio, one protocol list, and equal support years before ranking totals. BENQUAN GLOBAL LIMITED supplies Dell PowerStore T and HPE Alletra MP with competitive pricing.