Quick Take
Quick Take: Cisco Secure Firewall (FTD on 1200/3100/4200-class) and FortiGate midrange are peer NGFW options. Peer them on threat+SSL throughput, IPsec VPN scale, and HA design — not L4 Gbps stickers. Equalize security subscriptions, HA kits, and support years. BENQUAN GLOBAL LIMITED supplies both.
When Secure Firewall vs FortiGate Actually Matters
Quick Answer: Use this bake-off for midrange firewall refreshes and ASA to Threat Defense competitive checks where Fortinet is also approved. It is not a substitute for a Palo Alto or Check Point column, and the ASA renew against migrate decision stays on its own separate line.
For the full multi-vendor framework, see the Enterprise Firewall Buying Guide 2026.
- ASA migration: ASA to FTD RFQ checklist — renew vs migrate stays on its own line.
- Already vs Palo Alto: Palo Alto vs Fortinet · Check Point vs Fortinet vs Palo Alto.
- FortiGate sizing pages: 100F/200F · 900G.
- Keep PA / Check Point when open RFPs or existing skill dominate risk.
Architecture Fork — FTD/FMC vs FortiOS/Fabric
Quick Answer: Both are modern next-generation firewall platforms at midrange scale. The fork is day-two operations, contrasting Threat Defense with Firewall Management Center against FortiOS with FortiManager and the Security Fabric, plus how each vendor packages threat, URL and malware subscriptions across matched term years.
| Dimension | Cisco Secure Firewall | Fortinet FortiGate |
|---|---|---|
| Common midrange peer | 1200 / 3100 / 4200-class (confirm SKU) | 100F / 200F / 400F / 900G / 1000F-class (confirm) |
| OS / policy plane | Threat Defense (FTD) | FortiOS |
| Ops / management | FMC adjacency common | FortiManager / FortiAnalyzer / Fabric adjacency |
| HA pattern | Active/standby designs common — confirm SKU kit | HA pair designs common — confirm SKU kit |
| Subscription risk | Threat / URL / malware / support years must match brief | Same — UTP/ATP-class bundles must be year-matched |
| Sizing honesty | Threat + SSL decrypt assumptions — not L4 only | Same — FortiGate datasheet rows must be stated |
Naming traps
ASA renew is not the same RFQ as Secure Firewall FTD — see the ASA→FTD guide. FortiGate model letters (F/G) and throughput rows differ by threat/SSL columns — force both vendors onto the same decrypt assumption. Do not peer a branch FortiGate to a 4200-class data-center edge without saying so.
Peer Mapping (Intent, Not Nicknames)
Quick Answer: Map by threat throughput with SSL decryption enabled, VPN volume, high availability design and interface density. Branch briefs peer the 1200 class against FortiGate 100F or 200F, campus edge peers the 3100 class against 400F or 900G, and ASA renewals stay on a separate line.
| Intent | Cisco path | Fortinet path |
|---|---|---|
| Branch / compact NGFW | Secure Firewall 1200-class (confirm) | FortiGate 100F/200F-class (confirm) |
| Campus / midrange edge | 3100-class (confirm) | 400F / 900G-class (confirm) |
| Higher DC / campus core edge | 4200-class (confirm) | 1000F / higher FG class (confirm) |
| ASA estate in flight | FTD migrate column + ASA renew column | Competitive FortiGate column on same inventory |
| Keep Palo Alto too | Three-column RFQ with PA-1400/3400-class | Same — do not drop until TCO closes |
Ops & Fabric Fit
Quick Answer: Firewall choice follows the operating model your security team already runs. Firewall Management Center skill and ASA migration risk often tip Cisco, while FortiSwitch and FortiAP Fabric density often tips Fortinet. Threat throughput with your own decryption assumption is the only fair sizing ruler.
- Lean Secure Firewall when: Cisco standardization, FMC ops, or ASA→FTD migration risk dominates.
- Lean FortiGate when: FortiSwitch/FortiAP/Fabric adjacency and FortiOS skill already define day-2 ops.
- Still quote Palo Alto / Check Point when: Existing PAN-OS or Quantum estates, or open RFPs dominate TCO.
Threat+SSL is the only fair ruler
L4 firewall Gbps stickers routinely crown the wrong winner. Force both vendors to state threat prevention throughput with your SSL decrypt assumption, concurrent sessions, and VPN needs — then price subscriptions for the same term.
Sizing Truth — Equal Assumptions
Quick Answer: Force equal threat and SSL throughput targets, concurrent session counts, VPN volume, high availability topology, interface mix and subscription years onto both bills of materials. State the decryption percentage, cipher set and inspection profile explicitly, because a bare chassis quote against a fully subscribed one cannot be ranked.
- Throughput: Threat prevention + SSL decrypt — state the decrypt %, cipher set, and inspection profile.
- Sessions / users: Concurrent sessions or user count behind the firewall.
- VPN / HA: Site-to-site / remote access volume and HA pair kits on both lines.
- Lead time: Appliance + subscription entitlement + optics can break cutover — dual-path stock vs ATP.
RFQ Checklist — Dual NGFW BOM on One Brief
Quick Answer: Send one threat and SSL brief carrying exact Secure Firewall and FortiGate SKUs with equal subscription bundles, high availability kits and support terms. State the interface mix and quantities, add an optional ASA renewal column if migration is still open, and request quote validity plus delivery commitments.
What to put on the RFQ
- Threat+SSL throughput target, sessions, VPN, HA topology
- Interface mix (1G/10G/25G/40G) and quantities
- Cisco: exact Secure Firewall SKU, FMC path, licenses/support term
- Fortinet: exact FortiGate SKU, UTP/ATP-class bundle, FortiCare term
- Optional ASA renew column if migration is still open
- Optional PA-3400 / Check Point column for multi-vendor TCO
- Lead time: stock vs ATP; quote validity window
Use SKU Lookup, then submit the dual-vendor brief on rfq.html (or ngfw-sizing for a sizing-led form).
Frequently Asked Questions
Quick Answer: Neither wins universally: Cisco suits estates built around Firewall Management Center or facing ASA migration, while FortiGate suits Fabric estates. Peer midrange SKUs on threat throughput with SSL enabled, equalize subscriptions and high availability, and keep Palo Alto on the shortlist until total cost and skill risk close.
Not universally. Cisco wins for many FMC/ASA-migration estates. FortiGate wins for many Fabric estates. Dual-RFQ matched threat+SSL briefs.
Peer by threat+SSL, VPN, HA, and interfaces — often midrange FortiGate 400F/900G/1000F-class. Confirm current matrices on the quote.
Often yes until TCO and skill risk close. Use the Palo Alto vs Fortinet guide for that third column.
Submit one RFQ with the dual-vendor checklist above.
Key Takeaway
Key Takeaway: Peer the shortlist by class — 1200 against FortiGate 100F/200F, 3100 against 400F/900G, 4200 against 1000F — then decide on ops gravity: FMC skill and ASA migration favor Cisco, Fabric density favors Fortinet. Price only after threat-plus-SSL targets, subscription bundles, and HA kits match on both columns. BENQUAN GLOBAL LIMITED supplies both platforms with competitive pricing.