Quick Take
Quick Take: Cisco ends sale of most indoor Wi-Fi 6 APs on December 31, 2026. Last ship March 31, 2027; support through December 31, 2031. MR28 and listed outdoors are excluded. New projects should standardize on 6E/7 or dual-path peers Plan migration based on support lifecycle and budget cycles.
What the Deadline Actually Means
Quick Answer: After December 31, 2026 the affected indoor Wi-Fi 6 access points, accessories and licenses can no longer be ordered through Cisco point of sale. The last possible ship date is March 31, 2027, and installed units under contract stay supported through December 31, 2031. Plan orders against the ship gate, not the order date.
*Dates from Cisco EOL bulletin for Cisco and Meraki Wi-Fi 6 Indoor Access Points (announced March 30, 2026). Confirm SKUs and ATP on your dated quote.
Related: Wi-Fi 7 buy window · 9800 vs Aruba vs Mist · 8300 uCPE EOS · Meraki spare ATO.
- EOS ≠ pull-and-replace tomorrow — Keep running installed indoor Wi-Fi 6 under contract; stop designing new floors on it.
- Last ship is separate — A Dec 31 order that cannot ship by March 31, 2027 still fails the bulletin gate.
- Exceptions matter — Indoor MR28 and outdoor MR76 / MR78 / MR86 plus Catalyst outdoor C9124AX are not in this announcement.
Catalyst + Meraki, one bulletin
This wave covers indoor Catalyst 9100AX-family SKUs and Meraki indoor Wi-Fi 6 models in the same EOL document — including popular MR36 / MR44 / MR46-class lines. Treat dashboard vs Catalyst 9800 as an ops choice on the next generation, not a reason to keep buying indoor Wi-Fi 6.
Who Gets Hit Hardest
Quick Answer: The buyers hit hardest by the indoor Wi-Fi 6 end-of-sale are multi-building campus refreshes still quoting MR36, MR44, MR46 or Catalyst C9105, C9115, C9120 and C9130 for 2027 go-lives, managed service providers reusing standing Wi-Fi 6 order templates, and projects that ignore Power over Ethernet uplift for Wi-Fi 7.
- Standing Meraki ATO templates — Copy-paste Wi-Fi 6 lines into 2027 POs become dead SKUs.
- Catalyst indoor density estates — 9100AX refreshes need 6E/7 peers plus switch PoE audit.
- Memory / lead-time pressure — Wi-Fi 7 CapEx already competes with DRAM scarcity — see Wi-Fi 7 buy window.
Buyer Decision Matrix
Quick Answer: For the indoor Wi-Fi 6 end-of-sale, new indoor projects should move to Wi-Fi 6E or Wi-Fi 7 now. Last-buy Wi-Fi 6 only to hold an identical spare policy, and only when available-to-promise stock clears the ship gate. Dual-path Aruba or Juniper Mist when operational fit or capital expenditure is disputed.
| Situation | Hardware posture | Ops posture | RFQ ask |
|---|---|---|---|
| New floor / new building | CW916x or CW917x class | Dashboard or 9800 | PoE + density brief |
| Spare identical to installed Wi-Fi 6 | Last-buy only if ATP clears | Keep existing controller | Written last-ship note |
| MR28 / listed outdoor only | Outside this bulletin | Do not force-migrate | Confirm SKU exception |
| Ops fit disputed | Three-column shortlist | Equal density / PoE | Aruba + Mist dual-path |
| 2027 CapEx still on Wi-Fi 6 | Rewrite BOM now | Stop template reuse | Side-by-side 6 vs 7 TCO |
6E / Wi-Fi 7 Path & Procurement Traps
Quick Answer: Channel guidance commonly maps MR36 to CW9162 or CW9172, MR44 to CW9164 or CW9174, and MR46 to CW9166 or CW9176 class peers. Freeze the Power over Ethernet class and access switch capacity before ranking access point stickers, because a higher power class can strand ports sized for Wi-Fi 6 budgets.
- 6E vs 7 — 6E when 6 GHz matters now with lower CapEx; Wi-Fi 7 when multi-year runway and multi-link features matter. Equalize assumptions.
- PoE trap — Higher-class APs can strand ports if access switches were sized for Wi-Fi 6 budgets.
- “No migration product” rows — Bulletin lists many accessory / kit lines with no migration SKU. Do not invent replacements for covers and spacer kits.
- One AP portfolio — Newer CW917x class can serve Meraki dashboard or Catalyst 9800 — pick ops once, then standardize SKUs.
Equal-assumption dual-path
When you dual-quote Aruba or Juniper Mist, freeze client density, SSID count, PoE class, uplink mGig need, and controller/cloud years first. Otherwise the cheaper column is a different radio plan — see 9800 vs Aruba vs Mist.
Actions Before Year-End
Quick Answer: Before year-end, retire indoor Wi-Fi 6 order templates for new projects, remap density classes onto Wi-Fi 6E or Wi-Fi 7 equivalents, audit Power over Ethernet budgets on the access switches, dual-quote peer vendors, and place last-buy spare orders only where available-to-promise stock clears the published last ship date.
- Inventory — Indoor Catalyst 9100AX and Meraki MR36/44/46-class lines in flight.
- Apply exceptions — MR28 / outdoor carve-outs stay on their own lifecycle.
- Rewrite new-project BOMs — CW916x / CW917x or peer OEM only.
- PoE + switch audit — Port power and mGig before AP stickers.
- Dual-path — Aruba and Mist on one density brief; optional FortiAP Wi-Fi 7.
- Spare policy — Meraki spare ATO checklist + pre-PO validate.
RFQ Checklist — Indoor Wi-Fi 6 Exit
Quick Answer: On an indoor Wi-Fi 6 exit request, send the floor and density map, the Meraki Dashboard versus Catalyst 9800 operations choice, Wi-Fi 6E versus Wi-Fi 7 preference, Power over Ethernet class, access switch adjacency, model exceptions and peer vendor brief. Ask for quote expiry, stock availability and last-ship confirmation on spare purchases.
What to put on the RFQ
- Buildings / floors; target client density per AP
- Current indoor Wi-Fi 6 models (Catalyst and/or Meraki)
- New-project preference: CW916x vs CW917x class (or peer OEM)
- Controller: Meraki dashboard vs Catalyst 9800 vs dual-capable AP
- PoE class required; access-switch model and spare power budget
- mGig uplink need; mounting / antenna kits
- Exceptions present? (MR28 / outdoor SKUs)
- Alternate OEMs: Aruba and Juniper Mist peer BOM
- Lead time: stock vs ATP; Wi-Fi 6 spare must ship by Mar 31, 2027
Use SKU Lookup, then submit the dual-vendor brief on rfq.html.
Frequently Asked Questions
Quick Answer: The last order date for the affected indoor Wi-Fi 6 access points is December 31, 2026, so new projects should move to Wi-Fi 6E or Wi-Fi 7, or dual-path peer vendors. Model exceptions and Power over Ethernet budgets matter as much as the access point sticker price when rebuilding the bill of materials.
Not through Cisco POS after December 31, 2026. Last ship requests cannot go past March 31, 2027. Plan as if stock clears earlier.
No — indoor MR28 is explicitly excluded from this indoor Wi-Fi 6 announcement, along with listed outdoor models. Verify each SKU on the bulletin.
Not automatically. Choose 6E vs 7 on density, 6 GHz need, PoE, and CapEx runway — then dual-path Aruba/Mist if ops fit is disputed.
Send the wireless brief via RFQ.
Key Takeaway
Key Takeaway: Indoor Wi-Fi 6 buyers should treat December 31, 2026 as the last clean order window. Win on 6E/7 standardization, PoE honesty, and dual-path peers — not on stale ATO templates. Re-check PoE budgets before reusing old switch counts. Dual-quote Wi-Fi 7 peers before award.