Quick Take
Quick Take: Catalyst 9200 buyers face two families that look almost identical on a price list and behave differently in a stack. This page maps the SKU suffixes, PoE budgets, uplink choices, and stacking limits that decide whether a branch wiring closet gets quoted correctly the first time.
Family Comparison
Quick Answer: Modular vs fixed uplink is the first BOM fork — it also locks StackWise bandwidth and which stack kit you buy. Modular NM (4×1G, 4×10G, 2×25G, 2×40G) Fixed 4×1G / 4×10G / 2×25G. Family — Uplinks — StackWise — Fans / PSU C9200 — Modular NM (4×1G, 4×10G, 2×25G, 2×40G) — 160 Gbps — FRU fans; 2× PSU.
Figures follow Cisco Catalyst 9200 Series hardware and architecture documentation. Confirm network modules, PSU wattage, PoE budget, and DNA / Catalyst software subscriptions on the quote. Related: Catalyst 9500, Catalyst 9300, Cisco UDI lookup, SKU Lookup. Request a quote.
| Family | Uplinks | StackWise | Fans / PSU | Notes |
|---|---|---|---|---|
| C9200 | Modular NM (4×1G, 4×10G, 2×25G, 2×40G) | 160 Gbps | FRU fans; 2× PSU slots | Flexible uplink; C9200-STACK-KIT |
| C9200L | Fixed 4×1G / 4×10G / 2×25G | 80 Gbps | Fixed fans; 2× PSU slots | Cost-optimized; C9200L-STACK-KIT only |
Overview
Quick Answer: 1RU stackable access with up to ~392 Gbps switching capacity standalone (higher when stacked), PoE+/mGig copper, and IOS XE programmability for branch and mid-size campus closets. Pick C9200 for modular uplinks + StackWise-160, or C9200L for fixed 1G/10G/25G uplinks + StackWise-80.
For Wi-Fi 7 / 90W density compare Catalyst 9300X specs; equalize DNA/stacking cost with the 9200 vs 9300 DNA cost RFQ checklist; classic refresh fork: 3850 replacement 9200 vs 9300.
Popular Models (examples)
Quick Answer: SKU suffixes encode the decision: T is data-only, P is full PoE+, PL is partial PoE+, and PXG adds Multigigabit copper. The C9200 line takes modular uplink cards while every C9200L ships fixed uplinks. Dual power supplies lift the PoE+ budget to about 740W on 24-port and 1440W on 48-port models.
| SKU example | Access ports | Uplink style | PoE note |
|---|---|---|---|
| C9200-24T / 48T | 24/48× data | Modular | No PoE |
| C9200-24P / 48P | 24/48× PoE+ | Modular | Up to ~740W / ~1440W with dual PSU |
| C9200-24PXG / 48PXG | mGig + 1G PoE+ | Modular (incl. 25G/40G NM) | Wi-Fi 6 closet ready |
| C9200L-24P-4X / 48P-4X | 24/48× PoE+ | Fixed 4×10G | Common branch / IDF SKUs |
| C9200L-48P-4G | 48× PoE+ | Fixed 4×1G | 1G uplink budgets |
| C9200L-24PXG-4X / 48PXG-4X | mGig mix + PoE+ | Fixed 4×10G | mGig without modular NM |
| C9200L-48PL-4X | 48× partial PoE+ | Fixed 4×10G | Lower PoE budget SKUs |
With dual PSUs, full PoE+ budgets are typically ~740W (24-port) and ~1440W (48-port). Size PSUs from the datasheet for your endpoint load.
Stacking Rules
Quick Answer: Stacks reach eight members, but only within one family: modular C9200 units bond at 160 Gbps through the C9200-STACK-KIT, and fixed-uplink C9200L units bond at 80 Gbps through their own kit. Nothing here stacks with a Catalyst 9300 or a 2960-X, and every member needs the same license level.
- C9200 ↔ C9200 @ StackWise-160 (C9200-STACK-KIT)
- C9200L ↔ C9200L @ StackWise-80 (C9200L-STACK-KIT)
- Optional longer stack cables (1 m / 3 m) for taller racks
- Does not stack with Catalyst 9300 / legacy 2960-X
Use Cases
Quick Answer: Branch IDF, mid-size campus access, and Wi-Fi 6 AP aggregation when UPOE+/StackWise-480 is not required. C9200L-48P-4X or C9200-48P with DNA Essentials for phones, cameras, and APs. C9200 / C9200L PXG SKUs so multigig APs are not copper-starved. Need StackWise-480/1T, UPOE+, StackPower, or denser mGig — see Catalyst 9300 specs.
Standard PoE+ floor
C9200L-48P-4X or C9200-48P with DNA Essentials for phones, cameras, and APs.
mGig Wi-Fi closet
C9200 / C9200L PXG SKUs so multigig APs are not copper-starved.
When to upsize to 9300
Need StackWise-480/1T, UPOE+, StackPower, or denser mGig — see Catalyst 9300 specs.
Buying Checklist
Quick Answer: Start by choosing between C9200 and C9200L, since that single fork determines uplink style and stack bandwidth. Then set copper port count and PoE class, add a second power supply if the full PoE budget is needed, match the stack kit and cable length, and name the Essentials or Advantage term.
- C9200 vs C9200L
- Port count and PoE / mGig class
- Network module (modular) or fixed uplink SKU
- Primary + redundant PSUs for full PoE budget
- Correct stack kit and cable lengths
- Cisco DNA / Catalyst Essentials vs Advantage term
- Optics and Smart Net / SNTC
Search Cisco parts on SKU Lookup. Need UDI for licensing? See UDI lookup guide.
Which Part Numbers Should You Freeze on the RFQ (5 SKUs)?
Quick Answer: When quoting C9200L-48P-4X-A and sibling configurations across these 5 part numbers, lock the exact base MPN, redundant power supplies, optics, and matching 1-year or 3-year support tier on separate lines before comparing vendor discounts. Channel net pricing remains industry estimate / pending confirmation.
| Ordering SKU | Key Configuration & Boundary | Adjacent BOM Lines to Freeze |
|---|---|---|
C9200L-48P-4X-A | 48x PoE+, 4x10G SFP+, StackWise-80, Network Advantage, 740W PoE with PWR-C5-1KWAC. Not 9300L. | PWR-C5-1KWAC, C9200L-STACK-KIT, C9300L-48P-4X-E, SFP-10G per uplink |
C9200L-48T-4X-E | 48x data, 4x10G SFP+, StackWise-80, 176 Gbps, Network Essentials, PWR-C5-125WAC. Not 48P PoE. | C9200L-48P-4X-A, C9200L-48T-4G, C9200L-STACK-KIT, SFP-10G per uplink |
C9200L-24P-4X-E | 24x PoE+, 4x10G, StackWise-80, 370W/740W PoE, Network Essentials. Not 48P. | C9200L-STACK-KIT, PWR-C5-600WAC, SFP+ per uplink drawing, C9200L-DNA-E-24-3Y class |
C9200L-48P-4X-E | 48x PoE+, 4x10G, StackWise-80, Network Essentials not Advantage. 740W/1440W PoE. | C9200L-48P-4X-A, C9200L-STACK-KIT, PWR-C5-1KWAC, SFP+ per uplink drawing |
C9200L-24T-4X-E | 24x data, 4x10G, StackWise-80, PWR-C5-125WAC, Network Essentials. Not 24P. | C9200L-STACK-KIT, PWR-C5-125WAC, SFP+ per uplink drawing, C9200L-DNA-E-24 class |
Frequently Asked Questions
Quick Answer: A software subscription term ships with the hardware, so put Essentials or Advantage on the quote rather than treating it as optional. PXG models handle most Wi-Fi 6 closets, while dense UPOE+ or 10G Multigigabit requirements push the design to a Catalyst 9300. Older 2960-X stack cables cannot be reused.
The official Catalyst 9200 Series datasheet is on Cisco: nb-06-cat9200-ser-data-sheet (cisco.com). This page is the RFQ table — 9200 / 9200L / 9200CX families — so you size a closet stack before opening Cisco's sheet. Confirm DNA Essentials or Advantage on the quote.
Catalyst 9200 is sold with Cisco DNA / Catalyst software subscription options. Put Essentials or Advantage term on the RFQ with the hardware.
9200 PXG covers many Wi-Fi 6 closets. High-density UPOE+/10G mGig and larger stack bandwidth usually point to Catalyst 9300 / 9300X.
No — use Catalyst 9200 family stack kits and cables. Do not mix with 2960-X or Catalyst 9300 stacks.
Contact info@benquan.hk or request a quote.
Key Takeaway
Key Takeaway: Take the modular C9200 when uplink speeds may change or a 160 Gbps stack matters, and the C9200L when fixed 10G uplinks at a lower price are enough. Order the family-matched stack kit plus a second PSU. Match DNA tier years across quotes.