Quick Take
Quick Take: Arista 7280R3/SR3-class (e.g. 7280CR3-32P4 or 7280SR3 spine roles — confirm SKU) and Juniper QFX10002-class (e.g. QFX10002-36Q / -60C — confirm variant) are peer spine platforms for 100G leaf-spine EVPN. Peer on uplink speed, oversubscription, and optics — not OS slogans. Quote leaves separately. BENQUAN GLOBAL LIMITED supplies both.
When Arista vs Juniper Spine Actually Matters
Quick Answer: Run the Arista 7280 against Juniper QFX10002 comparison after leaf selection, or in parallel with it, for 100G spine refreshes outside a Cisco standard, EVPN-VXLAN fabrics, and estates where both Arista EOS and Junos spine platforms are approved. This is the spine peer decision; leaf part numbers belong on their own request line.
- Leaf already chosen: Arista 7050X3 vs QFX5120 leaf — this page covers spine only.
- Cisco third column: Nexus vs Arista leaf · Nexus vs QFX5120 leaf — keep Nexus spine when NX-OS/ACI skill dominates.
- Specs: 7050SX3 / 7280SR3 — do not confuse 7050X3 leaf with 7280R3 spine roles.
- Optics / lead time: OEM vs MSA optics · Arista lead time 2026.
- Keep leaf RFQ lines separate from spine — cross-reference oversubscription math only.
Architecture Fork — EOS/CloudVision vs Junos/EVPN
Quick Answer: Arista 7280 and Juniper QFX10002 both run modern leaf-spine EVPN-VXLAN fabrics, so the fork is day-two operations and scale, not marketing feature lists. Compare Arista EOS with CloudVision against Junos with its controllers, then check buffer depth and forwarding table headroom against your oversubscription target and external peering adjacency before ranking either spine.
| Dimension | Arista 7280-class | Juniper QFX10002-class |
|---|---|---|
| Common spine peer | 7280CR3 / 7280SR3 100G-class (confirm SKU) | QFX10002-36Q / -60C class (confirm variant) |
| OS | EOS | Junos |
| Ops plane | CloudVision / EOS automation adjacency | Junos / Mist / Apstra adjacency (design-dependent) |
| Overlay | EVPN-VXLAN leaf-spine standard | EVPN-VXLAN leaf-spine standard |
| Buffer profile | 7280R3 deep-buffer switch-router lineage | QFX10000 deep-buffer spine lineage |
| Optics risk | 100G/400G optics often exceed chassis delta | Same — itemize SR/LR/AOC + spares on both BOMs |
Naming traps
7280 is a family — R3/SR3/CR3 port layouts differ (25G server ports vs 32×100G spine boxes). QFX10002 has -36Q / -60C / -72Q variants — do not peer a 36-port 100G spine to a 48×25G deep-buffer leaf platform without documenting role and oversubscription. Leaf SKUs (7050X3, QFX5120) belong on a different RFQ line.
Peer Mapping (Intent, Not Nicknames)
Quick Answer: Map Arista 7280 and Juniper QFX10002 by spine role and uplink speed rather than family name. A 100G spine carrying two-to-one oversubscription from 25G leaves is the usual peer class here. If you need a 400G spine or a collapsed spine design, rewrite the brief before requesting quotes, because the part numbers change.
| Intent | Arista path | Juniper path |
|---|---|---|
| Standard 100G spine | 7280CR3-32P4 class or 100G-dense 7280R3 variant (confirm) | QFX10002-36Q class (confirm suffix) |
| Higher 100G density | 7280 variants with more 100G ports (confirm datasheet) | QFX10002-60C class (confirm variant) |
| Collapsed / small fabric | 7280SR3-48YC8 may serve collapsed spine — state role explicitly | QFX5120 uplink count may change spine count — recalc oversub |
| Keep Cisco too | Three-column spine RFQ with Nexus 9300-GX / 9500-class | Same — do not drop Nexus until TCO closes |
| Leaf separate | 7050X3 on its own RFQ line | QFX5120 on its own RFQ line |
Ops & Fabric Fit
Quick Answer: Spine choice should align with your leaf operating system and the skills your network operations team already holds. EVPN-VXLAN works on both Arista 7280 and Juniper QFX10002, so CloudVision versus Junos and Apstra adjacency, together with whichever leaf estate is already deployed, decides day-two risk more reliably than any buffer marketing claim.
- Lean Arista spine when: EOS runbooks, CloudVision, and Arista 7050X3 leafs are already standardized.
- Lean Juniper spine when: Junos EVPN skill, QFX5120 leafs, or Mist/Apstra fabric intent define operations.
- Still quote Nexus spine when: ACI/NX-OS certifications or existing Nexus leafs dominate migration risk.
- Buffer-sensitive designs: 7280R3 deep-buffer lineage and QFX10000 spine buffers matter for microbursts — do not assume all 100G boxes are interchangeable.
Optics decide spine TCO
100G SR/LR, 400G breakouts, DAC/AOC between leaf and spine, and spares routinely decide the winner after chassis stickers look close. Put them on both vendor spine lines — see OEM vs MSA optics.
Sizing Truth — Oversubscription & Equal Assumptions
Quick Answer: Force both spine bills of materials onto equal assumptions: identical leaf uplink counts, identical spine port utilization, the same oversubscription ratio, the same optics and spares, and year-matched software support. Spine quantity then follows the arithmetic instead of vendor preference, which is the only way an Arista 7280 quote and a QFX10002 quote become comparable.
- Oversubscription: Document target (e.g. 2:1 or 3:1) from leaf uplink aggregate to spine 100G capacity.
- Spine count: 2-spine minimum for HA; 4-spine when failure domains or ECMP width require it.
- Port map: Leaf 100G uplinks × leaf count ÷ spine 100G ports = utilization check.
- Licenses: EOS feature packs / Junos support terms must be year-matched on spine SKUs.
- Lead time: Optic and memory queues can break cutover — dual-path stock vs ATP on spine and optics together.
RFQ Checklist — Dual Spine BOM (Leaf Lines Separate)
Quick Answer: Write one fabric brief, then split it into a leaf bill of materials and a spine bill of materials so part numbers cannot drift between roles. Request an Arista 7280 class spine line beside a Juniper QFX10002 class spine line with equal optics, spares, and license years, plus an optional Cisco Nexus spine column.
What to put on the spine RFQ
- Spine count, 100G (or 400G) port requirements, redundancy model
- Oversubscription target with leaf uplink math (reference leaf RFQ separately)
- EVPN-VXLAN spine role (route reflector, anycast gateway, etc.)
- Arista: exact 7280 SKU family, EOS/support term, CloudVision if used
- Juniper: exact QFX10002 variant, Junos/support term, controller adjacency if used
- Spine optics: 100G/400G SR/LR/AOC counts + spares (OEM vs MSA policy)
- Leaf line (separate): 7050X3 / QFX5120 counts — cross-ref only
- Optional Nexus 9300-GX / 9500 spine column for three-way TCO
- Lead time: stock vs ATP; quote validity window
Use SKU Lookup, then submit the dual-vendor fabric brief on rfq.html.
Frequently Asked Questions
Quick Answer: Neither Arista 7280 nor Juniper QFX10002 is universally the better spine. Peer the 100G spine part numbers by role and oversubscription, keep leaf request lines separate, equalize optics and license years across both columns, then let Arista EOS versus Junos operational gravity decide once the dual-vendor request for quotation returns.
Not universally. Arista wins for many EOS/CloudVision estates with Arista leafs. Juniper wins for many Junos EVPN estates with QFX leafs. Dual-RFQ matched spine briefs with separate leaf lines.
Only when you document role and oversubscription. SR3-48YC8 is often leaf/collapsed spine; QFX10002-36Q is spine-class. Confirm exact suffixes and port maps on the quote.
No. Separate line items prevent SKU mix-ups and unequal optics. Cross-reference oversubscription math between leaf and spine BOMs only.
Often yes until TCO and skill risk close. Add Nexus 9300-GX or 9500-class spine as a third column when Cisco gravity exists.
Submit one RFQ with separate leaf and spine checklists above.
Key Takeaway
Key Takeaway: Arista 7280-class and Juniper QFX10002-class are peer spine platforms with different ops gravity. Win on optics honesty, oversubscription math, and separate leaf RFQ lines — then standardize the fabric. BENQUAN GLOBAL LIMITED supplies both with competitive pricing and configuration support for global buyers.